Personal alarm system additional sensors

Motion Sensor

The motion sensor 869 is a Passive infrared (PIR) based sensor which is designed to detect movement in a room and transmit a radio signal to a lifeline home unit or other Tunstall telecare enabled systems. It has been specifically designed for care applications where it is important to avoid detecting a user who may be on the floor following a fall (fall zone feature). This means that movement is not reported and ensures an inactivity alarm can be generated by the Lifeline home unit or other Tunstall telecare enabled systems.

Features:

  • Transmission to CAT 1 radio receiver - ensuring that signals from the sensors are received for ultimate reliability, essential where life-critical solutions are used Transmission to CAT 1 radio receiver - ensuring that signals from the sensors are received for ultimate reliability, essential where life-critical solutions are used
  • Fast PIR detection to send a transmission every 30 seconds, when continuous movement is detected Fast PIR detection to send a transmission every 30 seconds, when continuous movement is detected
  • Walk test mode – 3 minutes of LED flashing every time movement is detected to show the PIR is working properly Walk test mode – 3 minutes of LED flashing every time movement is detected to show the PIR is working properly
  • Can be configured to operate in Auto Low Battery mode (ALB) or Auto Presence (AP) – to transmit the status of the Motion Sensor Can be configured to operate in Auto Low Battery mode (ALB) or Auto Presence (AP) – to transmit the status of the Motion Sensor

Benefits:

  • 5m x 5m detection 5m x 5m detection
  • Fall zone – If the user has fallen on the floor and is moving around, the sensor will not detect movement. The Motion Sensor will need to be positioned on the wall between 1m-1.2m above the ground Fall zone – If the user has fallen on the floor and is moving around, the sensor will not detect movement. The Motion Sensor will need to be positioned on the wall between 1m-1.2m above the ground
  • Sensor can be installed flat against the wall or in a corner Sensor can be installed flat against the wall or in a corner
  • Simple installation Simple installation
  • Simple battery replacement without the need to remove the sensor from the wall Simple battery replacement without the need to remove the sensor from the wall

    • Motion Sensor

    Help when you need it

    • 1

      Press the Button

      Simply press the button on your pendant or alarm unit when you need assistance.

    • 2

      Speak to our staff

      Our staff will respond and speak to you via the alarm unit. If they cannot get in touch they will summon help.

    • 3

      Help is on the way

      We will call for help by contacting one of your nominated key holders (relative, friend or neighbour)

    Menu
    ×